To put one on your vehicle just locate a sturdy spot in your engine compartment such as the firewall or a fender well and mount the horizontal oil filter base. Install the oil filter bypass adapter in the stock filter location and then run the two oil lines from the bypass adapter to the filter mounting base. Screw on your PH8A or equivalent oil filter, or two filters if you choose the dual filter model and that's it. Next time you change the filter it will be quicker and easier. Since the filters are mounted upright there will be no oil spillage. Single and dual filter Trans-Dapt Oil Filter Relocation Kits are available for most popular cars. In addition to obvious improvement in accessibility Trans-Dapt's Dual Oil Filter Relocation Kits also increase you engine's oil capacity by approximately a quart and doubles the filtering surface. This provides cooler and cleaner engine oil. Each kit comes with all the brackets, hoses, fittings and mounting hardware you'll need for installation. Just supply your favorite brand oil filter. Trans Dapt Kits are not for diesel, marine or competition applications. The single filter kit cost $70.5 and the dual filter kit has a cost of $91.86. For these applications contact Trans-Dapt's sister company Hamburger’s Performance Products. Contact Trans-Dap at (562) 921-0404 www.tdperformance.com